We're sorry, but we no longer offer this item.
Call us at 1-800-944-4573 for personalized recommendations
check out these similar items that may be a good fit
Product Description
This Mactac Permacolor PermaGard SAG 60" x 82' Clear Anti-Graffiti and Window Protection Overlaminate is a 6.9 mil hard coated, high gloss and ultra-clear, durable polyester face with excellent graffiti, UV and abrasion resistance. It has an optically clear, acrylic, pressure sensitive adhesiveb protected by a 1.4 mil smooth PET film release liner. It is engineered to protect your images and windows from vandalism and add an additional layer of safety from flying glass shards in case of breakage. This film can be laminated to photographic prints, transparencies, latex, solvent-, eco-solvent, waterbased and UV inkjet prints, and UV screen printed images to impart superior protection for your graphics from graffiti, abrasion, UV light degradation, dirt, moisture and many other potentially damaging effects in both indoor and outdoor environments. It meets ANSI Z26.1 for use in private or public transport vehicles and areas (trains, subways, tramways, buses...) that require graffiti and window protection. This overlaminate can be wet applied directly to windows and mirrors or first laminated to a pressure sensitive print media and then applied onto flat surfaces. Plus, this film has superior solvent resistance, so if tagged, the graffiti can be easily cleaned off using most commercially available graffiti removing cleaners without damaging the graphic.
Product Details
- Features and Benefits:
- Developed to protect graphic images, private or public transport vehicles and areas (trains, subways, tramways, buses) that require a graffiti protection.
- Increase the impact resistance of windows
- Solvent resistant so graffiti can be easily cleaned using most commercially available graffiti cleaners without damaging the graphic.
- Do not directly applied on the vehicles but first laminated to a pressure-sensitive print media.
- Wets out over UV ink jet prints
- UV Protection built in
- Typical Uses:
- Private and public transportation vehicles
- Signage
- Use with:IMAGin Series, REBEL Series
- Physical Properties
Property Typical Values Test Method Thickness, inches (µm)
Film plus adhesive
0.0079 (200)ASTM D2103
(ISO 536)Peel Adhesion
lb./in. (N/25mm)
Stainless Steel
- 20 min
- 24 hr.
3.6 (16)
4.5 (20)PSTC – 101
(FTM-1)Quick Tack, lb./in² (N/25mm)
Stainless Steel
2.5 (11)FTM 9
(MACtac CTM-25)Dimensional Stability, (%)
MD
CD
< 0.2
< 0.2FTM 14
(Mactac CTM-2) (Method D)
48 hours @ 158°F (70°C)
Bonded to aluminumShear, Hours to fail
Stainless Steel – 2.2 lbs. @
72°F (22°C)150 PSTC - 7 Temperature Range
Application:
End Use:
50° to 104°F (10° to 40°C)
-40° to 194°F (-40° to 90°C)Adhesive pH Neutral TAPP-529 Face Tensile Strength (K/psi)
Elongation @ Break (%)28
160ASTM D-882A Resistance to Temperature
Change:No cracking, delamination,
clouding or deteriorationANSI Z26.1 Test #22 Luminous Transmittance: - 87.7% ANSI Z26.1 Test #2 Abrasion Resistance:
500g/wheel, 100 cycles’
w/SC10Fwheel% change: 3.4 ANSI Z26.1 test 17
(ASTM D1003)Light Stability (UV
Resistance):After 1600 hours
loss of light transmittance:1.1% ANSI Z26.1 test 24 - ref. test
5.11 ISO 4892-2
(spec. < 5% change)Flammability:
Smoke Emission:Flame index = 5
Flaming mode non-flaming mode 1.5min. 4 1 4.0 min 48 2 Optical Density 138 92 ASTM E162-13
ASTM E662-13cHumidity Test: No evidence of either material
separation or spots.ANSI Z26.1 Test #3 Bombardier Toxic Gas: Flame index = 5
Flaming mode non-flaming mode CO max 690 121 CO2 max 11023 410 NO2 <1 <1 SO2 <1 <1 HCl 35 31 HF 2 <2 HBr <1 <1 HCN <1 <1 SMP800c Rev. 6 (ppm) - Durability
The durability of the film is up to 2 years outdoors and 5 years indoor. While all PERMACOLOR overlaminating films have UV resistance built in to help extend the life of your image, the durability of the image is mainly dependent upon the quality of the inks (see technical data sheets given by the ink manufacturers) and pressure sensitive media being used. - Shelf Life
Two years when stored at 75°F (24°C) and 50% relative humidity or less. Note: Mactac recommends that rolls be stored on end or suspended from the core. - Chemical Resistance
Resistant to non-abrasive soaps, denatured alcohol, water, detergents and most diluted acids and alkalis. It is not affected by short term contact with most of aliphatic and aromatic hydrocarbons, ketones, esters, chlorinated hydrocarbons and alcohol - Limitations
1) The user is responsible for determining the product’s suitability, including adhesion and if needed, removal characteristics when used in applications other than listed specifically in this Performance Guide.
2) If there are any questions about applications, please contact your Mactac sales representative to discuss your requirements for recommendations.
3) If this is a printed Performance Guide it is an uncontrolled document. Please check the Mactac website for the latest, most up-to-date version.
- Recommendations
- Where exposure to moisture, chemicals, solvents or high pressure wash is anticipated, Mactac recommends sealing the edges with varnish, silicone or other sealant to prevent penetration by these liquids.
- The addition of heat while simultaneous mounting with Thermal Overlaminates may result in curl or have other detrimental effects on the finished product.
- Whenever possible, always test first to ensure end-use capability.
- Processing:
- LAMINATION:
- Mactac recommends laminating SAG 53 to your printed graphics with a professional laminator. Overlaminates should not be applied onto dusty or dirty prints.
- Mactac's pressure sensitive mounting films are intended for "Cold Roll Lamination" (40°F - 104°F).
- APPLICATION:
- Wet application method is recommended when used as a window protection film. We recommend using professional window application squeegees for a perfect application. Ref: TA2111 for proper installation instructions!
- MAINTENANCE & CLEANING:
- SAG films can be easily cleaned off using most commercially available window cleaners or and graffiti removing cleaners without damaging the graphic.
- LAMINATION:
- Values given are typical and are not necessarily for use in specification.
Specifications
- Adhesive Category: Optically Clear
- Adhesive Type: Permanent Acrylic
- Color: Optically Clear
- Films: Hard Coated Polyester (PET)
- Finish: Hard Coated High Gloss
- Length: 82'
- Width: 60"
- Liner Category: 1.5 mil Clear Polyester (PET)
- Outdoor Durability: 2 Years
- Precise Program: N
- Thickness: 6.9 mil
Technical Assistance Guide
Rolling And Shipping Laminated ImagesSurface Preparation
SAG Film Application Guide
Subscribe to Get Exclusive Offers!
Receive a 10% off coupon for just signing up.
Partners
Copyright © 2026 MyBinding
